Logo

strongarm2010007009.jpg
BLANK - Customize your own templates for the Mini-Rig! The blank template includes the spindle and dial-ring mounting screw holes only. Just drill and tap a hole to produce custom templates. #BT...$40.00
T3 LaGard Electronic Locks- This template Includes drill points for the side bar, relocker and solenoid for the 3600, 33E, 99E and the LG basic. #T7...$65.00
T4 Kaba Mas Locks- This template has drill points for the Kaba Mas, Auditcon, Cencon, B52 and X-07, X-08, and X-09 locks. #T4...$65.00
T5 Floor Safes- This template has drill points for Star, Gary C&E Rate, and Major floor safes. #T5...$85.00
T7 Multiple Locks- This template has drill points for the Ilco 505, Amsec ESL 10/20, S&G 6120. Also has optional drill points for LG 3330, Kaba-Mas B52, plus Mosler. #T7...$65.00
Next
strongarm2010007008.jpg
The Universal Template attaches to the safe's dial ring mounting screw holes for safe drilling with the MiniRig. Uni-Temp uses an X-Y axis system with ruler scales, and an index to allow you to set specific up, down, left and right measurements from the spindle hole center. Set-up is very fast. Lock in your setting, attach the Mini-Rig and start drilling.
The MiniRig quickly removes from the Uni-Temp for bit changes and hole inspections without readjusting. An additional mounting provision allows Uni-Temp to be mounted anywhere on a safe or vault, not just the dial ring screw holes. You can now use your favorite drill points on all types of locks with the MiniRig and Uni-Temp. $225.00 #UNI-1

MiniRig Templates & Uni-Temp

Click Templates Enlarge

Click Photo To Enlarge

 2228 Kenry Way South San Francisco CA, 94080
StrongArm Drills Inc.
(800) 710-8168